A Good Alternative To A Dirty Past

W We offer a unique autonomous power supply system for small to medium size consumers (from 50kW to 250kW). The operation of the system does not depend on the presence of wind or sun, as well as on other external factors. The system is highly reliable and durable. The operating principle of this station is based on the power transfer from compressed air to hydraulic oil and finally to convert the air pressure energy to electricity.

D Designed for continuous power supply and none stop work - 24/365. No pollution. No gas emissions. No flame. No external or internal explosions. Net Zero. Do not require any type of fuel, using only air during to work Fuel Less. Easy to Operate. Less maintance required. Can be settled at any place - No Special Placement Requirements.

Description of the unit operation

This generating system uses the principles of transmitting the force generated by the interaction of permanent and electromagnets to the piston of the cylinder through its rod and converting it into hydraulic fluid pressure in the power transforming unit (3), which in turn rotates the hydraulic motor (5) connected to the generator (7) through a flywheel (6).

To ensure the operation of the transforming unit (3), a power supply and control system (1) is used. This system (1) consists of four supercapacitor modules with a voltage of 24VDC or 48VDC, which are connected and controlled using the Tesla switch method.

To ensure uninterrupted operation of the hydraulic motor (5), an oil station (2) is used, which includes a safety system (prevention of high pressure), filtration and circulation of hydraulic fluid in combination with a block of hydraulic accumulators (4) of fluid under high pressure. Working pressure 260 bar or 315 bar.

When the generator (7) rotates, 3-phase electricity, 380VAC or 400VAC, 50Hz or 60Hz (at the consumer’s discretion) is generated and supplied to the consumer through the control cabinet (8).