NIMEC Group

Fast–Easy-Amazing

Air to Power

Tailored solution for GREEN power

A Good Alternative To A Dirty Past

W We offer a unique autonomous power supply system for medium size consumers (from 500kW to 1MW). The operation of the system does not depend on the presence of wind or sun, as well as on other external factors. The system is highly reliable and durable. The operating principle of this station is based on the power transfer from compressed air to hydraulic oil and finally to convert the air pressure energy to electricity.

D Designed for continuous power supply and none stop work - 24/365. No pollution. No gas emissions. No flame. No external or internal explosions. Net Zero. Do not require any type of fuel, using only air during to work Fuel Less. Easy to Operate. Less maintance required. Can be settled at any place - No Special Placement Requirements.

Description of the unit operation

The hydraulic motor (7) rotates the shaft via the flywheel (8) to which the main (9) and slave (10) generators are connected. Electric power from the main generator (9) 3 phases, 380VAC or 400VAC, 50Hz or 60Hz (at the consumer's discretion) is supplied to the control cabinet (11) and then to the consumer.

The electric power generated by the slave generator (10) is fed to the system operation control unit (1) and through this unit (1) it is fed to the supercapacitor module for its storage (the required amount for starting and uninterrupted operation during peak load) and through this module to the air compressor (2).

Compressed air is supplied through receivers (4) to the pressure energy exchange module (3), where the pressure is transferred to the hydraulic fluid, the flow of which is regulated by the oil station (5) and which is supplied under pressure through hydraulic accumulators (6) to the hydraulic motor (7). In this way, the system operates and the cycle is repeated.